Ethernet Controller Driver Windows 7
Realtek r8168 RTL8111/8168 Rev 3 drivers installed but still no wired connection to internet on 13.04 3 Wired connection problem (Ubuntu 13.04, Realtek RTL8111/8168 Ethernet controller).
To install the driver, proceed as follows
- Save and unzip the downloadable file.
- Locate and launch the executive file 'setup.exe' from the newly-created folder.
- Follow the instructions displayed by the setup.exe program
NOTE:
- On Plug and Play Windows platforms, the adapter will be identified and configured automatically. Please stop all the automatic installation by Windows system.
- To install driver, you should have administrator's privilege.
- If garbled text is displayed, please use 'AutoInst.exe' to install/uninstall driver again.
- The usage of 'AutoInst.exe' is the same as 'Setup.exe'.
Manual Installation:
- Manual installation is to install driver by the installation file (INF) rather than use the 'setup.exe' mentioned above.
- To install driver manually, please open Device Manager, expand the Network adapters tree list, select the 'Realtek FE/Gbe Family Controller', and click right button, execute the menu item Update driver..., and follow the direction to indicate the path of INF file.
- NOTE: Manual installation is a kind of method of installation by advanced user. Generic users please use the 'setup.exe' to install driver.
About Ethernet Drivers:
Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.
However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.
If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product’s lifetime, as well as include various other changes.
When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.
There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.
Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.
- COMPATIBLE WITH:
- Windows 10
Windows 10 64 bit - file size:
- 10.4 MB
- filename:
- 0030-Install_Win10_10031_10232018.zip
- CATEGORY:
- Network Card
- Realtek Ethernet Lan Driver for Windows 10 10.031. This is the first official Ethernet Lan driver from Realtek for Windows 10. This driver offers Network Interface Controller with Windows 10.
- The Realtek RTL8111G-CG/RTL8111GS-CG 10/100/1000M Ethernet controller combines a triple-speed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.
Realtek PCIe GBE Family Controller – the driver for gigabit network controllers on the basis of chips from a company Realtek. These network comptrollers are often built-in in system boards.
This package of drivers of Realtek befits both for a 32-bit and for 64-bit operating systems.
In the downloaded archive contains the driver for the Realtek network card on chip RTL8111B / RTL8168B / RTL8111 / RTL8168 / RTL8111C / RTL8111CP / RTL8111D (L) / RTL8168C / RTL8111DP / RTL8111E / RTL8168E / RTL8111F / RTL8411/ RTL8111G / RTL8111GUS / RTL8411B(N)RTL8118AS
Ethernet Controller Driver Xp
Support has been added: 2.5G Gigabit Ethernet – PCI Express RTL8125
If you need a driver for the PCI network card, chip RTL8139 or RTL810x, then we advise to download Realtek PCI Fast Ethernet Drivers.
Download drivers (Upd: 08.05.2019):
- Realtek PCIe GBE Family Controller LAN Driver 7125_04222019 for Windows 7 (10 MB)
- Realtek PCIe GBE Family Controller Win10 Auto Installation Program LAN Driver 10034_04222019 for Windows 10 (10 MB)
- Realtek PCIe GBE Family Controller LAN Driver 10613_01222016 for Vista and Server 2008 (6 MB)
- Realtek PCIe GBE Family Controller LAN Driver 8071_04222019 for Win8, Win8.1 and Server 2012 (10 MB)
- Realtek PCIe GBE Family Controller LAN Driver 5836_02142018 for WinXP and Server 2003 (9 MB)
- RTL8111DP/EP DASH All-In-One installation kit for Win7/Win8/Win8.1 V.1.12.0034 (18 MB)
- RTL8111DP/EP DASH console tool for Win7/Win8/Win8.1 V.5.9.491 (34 Mb)
- Dash In-Band Config for Windows (0.1 Mb)
- Windows Diagnostic Program for Win XP Only (6 Mb)
- Windows Diagnostic Program for Win 7/8/8.1/10 (13 Mb)
- Windows Diagnostic Program for Win 10 Only (5.6 Mb)
Ethernet Controller Driver Download
Unix (Linux):
Realtek Rtl8111h Ethernet Controller Driver Windows 10
- LINUX driver for kernel up to 4.7 v8.0.43 (93 Kb)
- FreeBSD 7.x and 8.0 1.95 (93 Kb)
- 2.5G Ethernet LINUX driver v9.002 r8125 for kernel up to 4.15 (58 Кб)
DOS (Upd: 08.05.2019):
Realtek Rtl8111h Ethernet Controller Driver
- UEFI UNDI Driver v2.048 (120 Kb)
- PXE ROM code – 0007-RTEGPXE.266 (170 KB)
- PXE and RPL ROM code – 0007-RTEGROM.266 (170 KB)
- NDIS Driver GBE 1.53 (70 Kb)
- DASH GBE NDIS2 driver 1.53 (40 Kb)
- 2.5G NDIS2 driver 1.53 (40 Kb)
- 2.5G PXE ROM Code (70 Kb)
- DOS Diagnostic program (RSET8168) – 0002-RSET8168_124 (56 Kb)